B2 Audio 15″ Rage Subwoofer


At times you need to exaggerate to make a point. These new subwoofers with their unique design and features doesn’t need to capture the trend, the RAGE sets the trend.
Positioned above the RIOT but just below the Rage XL subwoofers, the 1200 watt rating makes it great for intermediate setups.

All the subwoofers have over sized dual tinsel leads on a 10″ progressive spider. The triple slug motor design offers plenty of ventilation for the 3″ voice coil. Implementing features of the XL series such as ventilated pole piece, XD (cross drilled pole) flow and 8 flared additional vents shows the abilities of the RAGE.

At this level, the Rage out performs it competition in both quality and value.

Specifications: RAGE 15D2 RAGE 15D4

Frequency Response: 10 Hz ~ 500 Hz 10 Hz ~ 500 Hz
Sensitivity: dB 89 dB
Nominal Impedance: Dual 2 Ohm Dual 4 Ohm
DC Resistance (RE): 1.9 Ohm 3.2 Ohm
Resonance Frequency (FS): 32 Hz 33.5 Hz
Power Handling: 1200 Watts 1200 Watts
Peak Dynamic Power Handling: 2000 Watts 2000 Watts
6.73 6.24
QES: 0.56 0.61
QTS: 0.5 0.55
VAS: 44.7 L 41.2 L
Voice Coil Diameter: 3″ 3″
CMS: 50 um/N 40 um/N
MMS: 483.7 g 468 g
BL^2/RE: 189.15 171.6
Magnet Weight:
350 Oz 350 Oz
XMAX one way:
0.8″ / 20 mm 0.8″ / 20 mm
8.8 L / 0.312 cu.ft 8.8 L / 0.312 cu.ft
*It is essential that our subwoofers are given time to allow the suspension to soften up. Depending on use, this may take several weeks. While this process is undergoing, it is not recommended to apply full amplification power according to the subwoofers specs. Once the moving parts have been broken in, the performance of your subwoofer will increase.

Categorías: ,